RTE-6 is designed to control the power or fan speed in dependence on the size of input variable. It is applicable for single-phase loads and max current of 6 A.
RTE-6 is designed to control the power or fan speed in dependence on the size of input variable. It is applicable for single-phase loads and max current of 6 A.
The 0-10 V DC input (U clamp), 0-20 mA input (I clamp) or the five digital inputs (clamps D1 – D5) can be used as the control variable. If there isn´t any digital input connected or both the analog inputs are zero, the triac will turn-off. The minimal revolutions can be adjusted in range roughly 60 – 150 V with use of the trimmer placed near the terminals. The regulator us equipped with an emergency input (clamps TK -TK). If this input will open, the triac will turn-off. The fan thermo-contact can be connected to it. To protect against thermal overload of the triac there is a temperature sensor inside the regulator. An LED pilot light is signalizing the regulator actual state.
Typ čidla | |
---|---|
Power supply |
◦ universal regulator
◦ analog input 0-10 V
◦ relay 10 A / 250 V AC
◦ power supply 230 V
Pardubická 177
537 01 Chrudim
Czech Republic
obchod@protronix.cz +420 722 931 799 +420 469 625 190 ID 25962264 VAT ID CZ25962264
© Protronix s.r.o. 2024