◦ boost ventilation button
◦ selectable CO2 measuring range
◦ analogueue output, relay
◦ power supply 12 and 24 V
The NL-ECO-CO2-BA room sensor is used to continuously monitor indoor air quality and also to effectively control the HVAC system performance in accordance with the current indoor air quality level. The sensor continuously monitors the carbon dioxide concentration (CO2) in the air.
It is suitable for offices, schools, lecture rooms, shopping centres, households, restaurants, fitness centres, commercial buildings, etc.
BOOST button – BOOST mode
This boost mode is used to set the sensor-controlled HVAC to maximum power regardless of the current concentration (also depends on the HVAC setting). In this mode, the relay is switched and the sensor analogue output is set to the maximum – 10 VDC. You can find more information about the boost button function in the Instructions for this sensor.
The sensor also has a switchable audible alarm to indicate that the pre-set CO2 concentration level has been exceeded.
◦ SCHOOL SENSOR
◦ extended measurement range
◦ power supply 24 V AC/DC
◦ acustic alarm
◦ to air duct
◦ led signalling
◦ power supply 24 VAC/VDC
◦ analogueue output 0-10 V, relay
◦ works on the optical NDIR principle
◦ adjustable sensitivity
◦ 0 – 10 V analog output
◦ output relay
Pardubická 177
537 01 Chrudim
Czech Republic
obchod@protronix.cz +420 722 931 799 +420 469 625 190 ID 25962264 VAT ID CZ25962264
© Protronix s.r.o. 2024